LED Street Lighting

LED street lighting

LED street lighting is suitable for safely and functionally illuminating a yard, driveway, parking lot, access road, or business premises. Choose a separate street light for an existing pole or wall bracket, a complete lamppost for a new light point, or solar street lighting when no power connection is available.

The right system depends not only on the wattage. Also check the mounting height, light output, light distribution, pipe diameter, supply voltage, and desired control. This prevents a street lighting fixture from not fitting the pole or providing too much, too little, or incorrectly directed light.

What do you need: fixture, pole, or complete lamppost?

You only need a separate fixture if a suitable light pole, lamppost, or wall bracket is already present.For a completely new light point, choose a pole with a fixture or a complete lamppost, optionally supplemented with an adapter, anchor, and sensor.

Solution	Choose this when	Check before purchase
Standalone street light fixture	A suitable pole or wall mount is already present	Pipe diameter, supply voltage, light output, beam angle, and sensor compatibility
Standalone light pole	You want to combine a fixture and pole height yourself	Pole height, foundation, cable entry, top diameter, and required adapter
Complete lamppost	You want to order a pole and fixture as a single matched solution	Included components, light color, mounting method, and anchoring
Wall bracket with street light	Installation on a facade, shed, or commercial building is more practical than a freestanding pole	Diameter of the wall support, load-bearing capacity of the surface, and lighting direction
Solar lamppost	Mains power is not available or you want to avoid trenching for power cables	Available amount of daylight, battery capacity, sensor settings, and installation height

 

View the available lampposts when you are looking for a new pole or complete combination.Voor losse masten, adapters, verlengstukken en bevestigingsmateriaal ga je naar de collectie lichtmasten.

Past ieder straatarmatuur op iedere mast?

Nee, een straatarmatuur past alleen wanneer de aansluitdiameter overeenkomt met de mast, muursteun of adapter. Meet daarom zowel de buitendiameter van de mast als de aansluiting van het armatuur en controleer de maat in millimeters op de productpagina.

Een passende verloopadapter kan twee verschillende diameters met elkaar verbinden. Controleer daarbij afzonderlijk of de adapter geschikt is voor de mast én voor het armatuur. Elektrische compatibiliteit zegt namelijk niets over de mechanische aansluiting of fysieke draagkracht.

Los armatuur of complete set?

Kies een los armatuur wanneer de bestaande mast, bekabeling en bevestiging nog geschikt zijn.A complete set is more practical when you are installing a new light point and want to be sure that the pole, fixture, and connection are matched to each other.

Always check what is included with a complete lamppost. A lampshade or integrated LED module may be included, while a foundation anchor, connection cable, or mounting hardware may be required separately.

Street lighting with twilight sensor or motion sensor

Street lighting with a twilight sensor automatically switches on when it gets dark, while a motion sensor reacts to people or vehicles within the detection area. You need a twilight sensor for lighting that must turn on automatically every evening and a motion sensor when light is only needed upon activity.

Some LED street lighting combines both functions.The twilight sensor then determines whether it is dark enough, and the motion sensor subsequently activates or intensifies the light. The exact operation varies by fixture: one model switches completely on and off, while another model remains lit in a dimmed state.

Check before purchase:

• whether the sensor is built into the fixture or must be ordered separately;
• whether the detection distance and detection angle suit the location;
• whether the illumination duration and sensitivity are adjustable;
• whether the street light turns off or dims back down after motion;
• whether a remote control or additional sensor is required.

LED street lighting with a twilight sensor is especially practical for yards, access roads, and parking lots that need to be illuminated every night.Motion detection can be suitable for locations without continuous traffic, such as a private driveway, storage area, or loading and unloading zone.

For smaller zones along a facade, entrance, or back door, you can also opt for outdoor lights with sensor.

Solar street lighting

Solar street lighting is suitable for locations without a permanent power connection. The solar panel charges a battery during the day, after which the stored energy is used to power the LED street light in the dark.

A solar street light avoids excavation work for a power cable, but does require sufficient unobstructed daylight. Therefore, do not place the solar panel in the shade of trees, buildings, fences, or other obstacles for extended periods. Less sunlight means the battery can store less energy and the available operating time may decrease.

Choose solar street lighting primarily for:

• remote yards and access roads;
• parking lots without existing cabling;
• temporary construction and storage sites;
• agricultural areas;
• Homeowners Association (VvE) grounds where cable installation is difficult;
• new light points where excavation is undesirable.

When choosing a solar lamppost, do not look only at the stated wattage. Also pay attention to the actual light output in lumens, battery capacity, expected operating time, sensor operation, lighting modes, mounting height, and the position of the solar panel.

View the solar lampposts for site lighting for complete poles with solar panel, battery, and LED light source.For smaller applications around the house, garden, or patio, you will find more options under solar lighting.

For yards, driveways, parking lots, and sites

LED street lighting can be used for both residential and commercial applications, but every location requires a different light distribution and mounting height. Therefore, first determine where visibility is needed, which routes are used, and where light should not cause a nuisance.

Street lighting for yards and driveways

For a yard or driveway, targeted lighting of the entrance, pathway, and parking spot is usually more important than the highest possible wattage. Position the street light so that visitors, vehicles, and obstacles are visible without the light shining directly toward the house, bedroom window, or adjacent property.

A street light with a twilight sensor is suitable when the entrance needs to remain visible all evening. Motion detection is a logical choice when the driveway is only used occasionally.

Street lighting for a parking lot or homeowners' association (VvE) area

For a parking lot, an even distribution of light is more important than a single very bright light beam. Multiple well-placed light points are better able to limit dark zones, harsh shadows, and glare than a single high-output fixture.

Map out the dimensions of the area, parking layout, walking routes, entrances, and surrounding residences prior to purchase. For a larger homeowners' association (VvE) or parking area, a lighting plan helps determine the number of poles, mounting height, and light distribution.

Street lighting for agricultural areas and riding arenas

For an agricultural yard, riding school, or riding arena, you need robust outdoor lighting that matches the size and use of the property. In addition to light output, pay attention to the IP rating, mounting method, light direction, and accessibility for maintenance.

Prevent a situation where only the center of the area is brightly lit while edges, gates, and walkways remain dark. In practice, this means that the position and beam angle of the fixtures are at least as important as the total wattage.

LED public lighting and commercial sites

For LED public lighting, shared access roads, and larger commercial sites, a project-based calculation is recommended.The desired visibility, mounting height, mutual distance, uniformity, glare, and potential light nuisance together determine which fixtures are needed.

In these situations, do not choose solely based on wattage. First determine how much light is needed where and then select the matching poles and fixtures. Also view the options for professional site lighting or contact us for a lighting plan.

Frequently asked questions

How much does a lamppost cost?

A lamppost does not have a fixed total price, because a separate pole, a complete lamppost, and a solar light pole consist of different components. Calculate the total investment based on the pole, the fixture, the light source, any adapters, anchoring, cabling, and installation.

A separate pole is generally cheaper than a complete set including a fixture. Furthermore, a solar streetlight includes a solar panel, battery, and often a sensor. Therefore, always compare the complete configuration rather than just the price of the pole.

Can I install a streetlight myself?

Yes, you can sometimes install a streetlight yourself, provided you have a suitable foundation, the right mounting materials, and sufficient knowledge of the installation. The pole must be anchored stably, vertically, and in accordance with the installation instructions.

If in doubt, have a fixed outdoor electrical connection installed or checked by a qualified electrician. A solar streetlight does not require a grid connection, but the subsurface, anchoring, and unobstructed positioning of the solar panel remain important.

What is a smart lamppost?

A smart lamppost automatically adjusts its lighting using a sensor, timer, dimming function, remote control, or connected control system. For example, the light can turn on at dusk and temporarily provide brighter light when motion is detected.

“Smart” does not automatically mean that a lamppost operates via an app or smart home platform. Check the product page to see which control methods are actually supported and whether additional sensors, remote controls, or gateways are required.

How many watts does street lighting need?

Street lighting does not have a single fixed recommended wattage for every situation. The required power depends on the light output in lumens, efficiency in lumens per watt, mounting height, beam angle, surface area, and desired illuminance.

A higher wattage does not automatically mean a better result. An efficient fixture with a suitable light distribution can deliver more usable light with less power than a stronger street light that is positioned incorrectly. For large parking lots, commercial sites, and public routes, have a lighting plan drawn up.

What is the difference between a light pole and a lamppost?

A light pole is primarily the functional support on which a fixture, floodlight, or other accessory is mounted. A lamppost is more often used as a complete combination of pole and lamp and can also have a more decorative appearance.

In practice, these terms are sometimes used interchangeably. Therefore, always check whether the fixture, light source, adapter, and anchorage are included. The product contents are more important than the product name.

View all LED street lighting — need business advice or a lighting plan? Our specialists are here to help.