Light Masts
A light mast is a fixed steel pole on which you mount a suitable LED fixture, construction lamp, or other compatible equipment yourself. In this category, you will find only standalone light masts and corresponding accessories; a lamp or fixture is not included.
The masts have a standard height of 3 meters and can be extended up to a maximum of 6 meters using separate extension pieces. This allows you to assemble a light mast for a driveway, yard, parking lot, industrial site, or riding arena. Before purchasing, always check whether the connection, adapter, and mechanical load match the fixture you intend to mount.
What height light mast do you need?
For a compact driveway or a smaller yard, a light mast of 3 to 4 meters is usually a logical starting point.A 5 or 6-meter light mast is commonly used when light needs to be distributed over a larger area, such as a parking lot, industrial site, or along a riding arena.
A taller mast gives the fixture more space to spread the light, but it also reduces the maximum mechanical load. Therefore, do not choose the height solely based on coverage, but also check the weight of the fixture, the adapter, and any mounting brackets.
| Light mast height | Composition | Maximum mechanical load | Frequently used for |
|---|---|---|---|
| 3 meters | Standard mast | 20 kg | Driveway, garden, smaller yard |
| 4 meters | Mast + 1 extension piece | 17 kg | Yard, entrance, or compact parking lot |
| 5 meters | Mast + 2 extension pieces | 15 kg | Larger site or riding arena |
| 6 meters | Mast + 3 extension pieces | 12 kg | Wide site and parking lot lighting |
The stated weights are the maximum mechanical loads of the mast.They say nothing about the electrical power of the fixture. For the load, add up the weight of the fixture, the adapter, the T-piece and other mounted components.
A 100 cm extension piece makes it possible to increase the height of the mast in fixed steps. This is different from a fully telescopic light mast: the height is not adjusted continuously, but built up using separate mast sections.
Light mast + LED fixture: assemble complete sets
A complete setup consists at a minimum of a light mast, a matching fixture, and the correct mount or adapter. The fixture is not included with the light mast and must be selected separately.
Check the diameter of the mast, adapter, and fixture
The most important compatibility measurement is the diameter of the connection at the top of the mast.Check this dimension separately at:
- the top tube of the light pole;
- the adapter inlet;
- the mounting opening of the fixture.
Even a slight deviation can mean that parts will not fit together directly. Therefore, do not rely solely on the general designation "suitable for a light pole," but compare the exact diameters on the product pages.
For various connections, options include a tilting street light adapter of Ø60 mm and an adapter from Ø60 to Ø50 mm available. A tilting adapter allows you to adjust the position of the fixture so that the light beam can be directed more effectively onto the desired surface.
Which LED fixture fits a light pole?
You need an outdoor fixture that is suitable for the chosen mounting height, connection, and environment. For a driveway or parking lot, an LED street light is often used. For a yard, work site, or riding arena, a directional LED floodlight may be suitable if it can be mounted safely on the pole and in accordance with the product specifications.
A lamppost fixture can only be placed on the pole if the connection diameter, mounting method, and total weight match. Additionally, check the IP rating, beam angle, light output, and electrical connection of the chosen fixture.
How many fixtures can be installed on a single pole?
Normally, you place one compatible fixture on the standard connection.With a suitable T-piece for a 60 mm light mast additional fixtures, cameras, or other accessories can be mounted.
The maximum number of fixtures is not solely determined by the number of mounting points. The total mechanical load remains decisive. Therefore, add up the weight of all fixtures, adapters, brackets, cables, and accessories, and stay within the maximum load associated with the chosen mast height.
How much power does a light mast need?
The light mast itself does not consume power; the wattage belongs to the mounted LED fixture. The required power depends on the surface area, mounting height, beam angle, desired illuminance, and light output in lumens.
As a general guideline, a 30-watt LED street light can be used for an area of approximately 15 by 15 meters. For larger areas, fixtures from 50 to 100 watts are often used, depending on the mounting height and application. Please do not use this as a fixed rule: two fixtures with the same wattage can yield different results due to differences in lumens, optics, and beam angles.
For a parking lot, riding arena, or commercial site, a lighting calculation is more reliable than simply choosing based on wattage. A lighting plan shows how many poles and fixtures are needed, where they should be placed, and which beam angles are suitable.
For outdoor areas, parking lots, driveways, and riding arenas
A light pole is suitable when lighting needs to be distributed across an outdoor space from a fixed, elevated position.The required pole height and luminaire depend on the specific area and application.
Light pole for a site or yard
For a yard or business site, uniform lighting is important for visibility, orientation, and safe use. Position the pole so that buildings, vehicles, and other obstacles cast as little shadow as possible. Also, ensure that the light beam does not spill unnecessarily onto surrounding homes or roads.
Light pole for a parking lot
For a parking lot, the lighting must reach both the parking spaces and the driveways. A higher pole can cover a larger area, but requires a luminaire with an appropriate light distribution. When using multiple poles, the light beams must overlap sufficiently to minimize dark zones.
Light pole for a driveway
For a driveway, a light pole of 3 or 4 meters is often sufficient, depending on the length and width. Direct the fixture toward the entrance and the walking or driving area, without blinding drivers or local residents. A tiltable adapter helps to adjust the beam more precisely.
Light pole for an equestrian arena
An equestrian arena requires even lighting with as few harsh shadows as possible. Preferably place poles outside the riding arena and ensure that horses and riders do not look directly into the fixture. For a reliable choice, the dimensions of the arena, the position of the poles, the mounting height, and the beam angle are required.
Need help with light distribution? View the options for a professional lighting plan for site lighting. Hierbij worden onder meer de mastposities, lichtsterktes en bundelhoeken vooraf berekend.
Light mast or lamppost: what is the difference?
The main difference usually lies in the application and appearance, not just in the pole itself. A light mast is typically intended for functional site, parking lot, or work lighting. A lamppost often refers to a pole with a decorative or classic fixture.
In practice, the terms are frequently used interchangeably. A steel pole can be referred to as a light mast or lamppost, depending on the fixture mounted on it. This category page concerns individual, fixed masts without a lamp.
A mobile light mast is a different type of product. It is usually mounted on a mobile chassis or temporary base and is used on construction sites or at events.The light poles in this category are intended for fixed installation and are not mobile.
Frequently asked questions
How much does a light pole cost?
A standalone light pole at LedLoket currently starts from €129. The final price depends on the chosen diameter, pole height, and required accessories. Extensions, adapters, mounting brackets, and the LED fixture are sold separately.
Is a lamp included with the light pole?
No, the light poles in this category are supplied without a lamp or fixture. You select the fixture separately based on the desired light output, mounting height, beam angle, IP rating, and connection diameter.
Is the light pole extendable?
No, the pole is not continuously or telescopically extendable.The standard height is 3 meters and can be extended up to a maximum of 6 meters using individual 1-meter extensions. Check the lower maximum load capacity with each additional mast section.
How many fixtures fit on a single light pole?
Normally, one compatible fixture fits the standard connection. Additional fixtures or accessories can be mounted using a suitable T-piece, provided the connection fits and the total weight remains within the maximum mechanical load capacity of the pole.
What should I check before installation?
Before installation, check the surface, foundation, pole height, wind load, connection diameter, and total weight of all components. Have the electrical connection and any installation at greater heights performed or checked by a qualified installer.
