AC Triac RF built-in wireless dimmer | 100-240V | Push to dim
-
Reviews
...
-
Free shipping from 75,-
-
Ordered before 16:00 = delivered tomorrow
-
Easy returns within 30 days of purchase
AC Triac RF built-in wireless dimmer | 100-240V | Push to dim
- Direct to:
- Description
- Specifications
- Reviews
- Related products
Specifications
-
Product category
-
Buying Guide
-
Manuals
-
Length (cm)
-
Width (cm)
-
Height (cm)
-
Voltage
-
IP ratingIP20 - No protection
-
ControlRemote control
-
Dimming technologyPhase cut
-
Warranty
-
CertificationsCE
-
ConnectionMains power
-
Power220
DownloadAC Triac RF built-in wireless dimmer | 100-240V | Push to dim
With this built-in TRIAC wireless dimmer, you can wirelessly dim 220-240V LED lighting in combination with an RF wireless remote control . You can connect this wireless LED dimmer directly to 100 - 240V, so you do not need an additional power supply. You can also install this RF Triac built-in dimmer inside a junction box behind a push switch, for example. If you then connect a push switch to it, you can also dim the LED lights using PUSH TO DIM.
If you want to dim different zones separately using a remote control, this is also possible. When you connect multiple of these wireless dimmers for, say: kitchen, living room, storage room, bedroom, you can dim the spaces separately per zone on the remote control. The maximum power that you can connect to this wireless LED dimmer is 244 Watt.
The size of this wireless dimmer is also very compact, making it easy to incorporate into the mounting plate of a pendant light, behind a switch, or in the power supply line running to your garden lighting, allowing you even to dim your garden lighting wirelessly. The dimmer must be installed in a moisture-free location, as it is not waterproof.
It works exceptionally well with the corresponding wireless remote control . This is the ultimate new way to dim LED lighting from the comfort of your armchair.
Dimensions:
- Dimmer length: 52 mm
- Dimmer width: 52 mm
- Dimmer thickness: 26 mm
How do you connect a wireless dimmer with a remote control?
You can connect the dimmer directly to the mains power (220 Volt). Connect the power wires to the input of the dimmer.On the output, you place the power wires that run to your lighting.
You only need the A2 and A1 when using a push dimmer. You then connect this to the A1; you do not need the A2 for this. The neutral wire is already connected at the input in this setup.
How do you pair the remote control to the dimmer?
Step 1. On the back of the dimmer, you will see a black button. To pair the remote control to the dimmer, you must press this button.
Step 2. Choose a zone on your RF Wireless remote control to which you want to pair the dimmer.
Step 3. Once you have chosen a zone, briefly press the 'ON' button followed briefly by the 'OFF' button.
The dimmer is then paired with your remote control.
