Are you looking for powerful lighting for a warehouse, workshop, production hall, or sports hall? With an LED high bay, you can illuminate large and high spaces efficiently, brightly, and evenly. At LedLoket you will find high bay LED fixtures in 100W, 150W, 200W, and heavier versions, including dimmable variants and models for intensive commercial use.
Are you unsure about the right wattage, light color, or number of fixtures? We are happy to help you with personal advice. For business projects, we also provide free lighting calculations, ensuring you immediately choose the right high bay solution.
LED high bay for high spaces
A high bay, also often called an LED high bay or UFO lamp, is a powerful fixture for spaces with a high ceiling. Think of heights from approximately 4 meters, where standard lighting usually has too little reach or insufficient light output.High bays are widely used in warehouses, storage facilities, workshops, garages, production environments, sports halls, and riding arenas. For practical tips specifically for warehouses, see warehouse lighting.
The round LED UFO design is popular because it is compact, dissipates heat effectively, and delivers a high light output from a relatively small fixture. The major advantage of LED is primarily practical: you benefit from lower energy consumption, instant full light, reduced maintenance, and a long lifespan. Especially in locations where fixtures are mounted at great heights, this saves time, costs, and downtime.
How to choose the right high bay
The best high bay is not chosen based on wattage alone. At least as important are the light output in lumen, the mounting height, the beam angle, and the desired lux level on the floor or workspace. In a storage facility, the lighting requirements are often lower than in a production area or assembly environment.For task lighting, NEN-EN 12464-1 is often used as a practical guideline.
Use the table below as a starting point for choosing a 100W, 150W, or 200W high bay:
| Ceiling height | Typical application | Recommended wattage | Recommended light output | Standard beam angle |
|---|---|---|---|---|
| 4 - 6 meters | Small warehouse, garage, workshop | 50W - 100W | approx. 8,000 - 15,000 lumens | 90° - 120° |
| 6 - 8 meters | Warehouse, sports hall, production facility | 100W - 150W | approx. 15,000 - 24,000 lumens | 90° - 120° |
| 8 - 10 meters | Large hall, shelving aisles, logistics | 150W - 200W | approx. 21.000 - 30,000 lumens | 60° - 90° |
| 10 meters and higher | High industrial hall, large sports hall | 200W - 240W+ | from approx. 30,000 lumens | 60° - 90° |
If you are specifically looking for a 100W, 150W, or 200W LED high bay, this provides a good starting point. If you work with high shelving units, dark floors, or machinery that causes shadows, a more powerful model or a different beam angle may be a better fit.
How many high bays do you need?
The question “how many high bays per m²?” depends on four factors: floor area, ceiling height, desired lux level, and light distribution. A quick basic calculation is: surface area × desired lux = total lumens required. Then divide that number by the effective light output per fixture for an initial indication of the number of high bays.Comprehensive explanations and calculation examples can be found in calculating industrial hall lighting.
Example: a 400 m² warehouse with a target of 200 lux requires approximately 80,000 lumens. If you choose 20,000-lumen fixtures, theoretically you would need 4 of them. In practice, an extra margin is often needed for height, uniformity, and light loss, making 5 fixtures more logical.
- Storage and warehouse: usually approx. 150 - 300 lux
- Workshop and production: usually approx. 300 - 500 lux
- Aisles and high racks: extra attention to placement and beam angle
Want to be sure what you need? For business projects, LedLoket provides a free custom lighting calculation.
Light color, beam angle, and control
3000K, 4000K, or 6000K?
The light color determines how a space feels and how well details are visible.A 3000K high bay provides warmer light and is primarily chosen where comfort is important. 4000K is the most universal choice for warehouses, workshops, and general halls. 6000K provides cooler, daylight-like light and is well-suited for production, logistics, and areas where maximum visibility is desired.
Which beam angle suits your hall?
The beam angle determines how widely the light is distributed. A wide beam of 90° to 120° is suitable for open spaces where you want uniform light. A narrower beam of about 60° to 90° works better with higher ceilings or in racking aisles where you want to direct the light more purposefully downward. The correct beam prevents dark zones and helps create a better lighting pattern with fewer fixtures. If you want very uniform lighting over longer aisles or large areas, consider industrial LED trunking systems as an alternative.
Dimmable high bays and sensors
Many high bay LED fixtures are available as dimmable versions, for example with 1-10V or DALI control. This is useful if you want to adjust the light level based on occupancy, daylight, or working hours. In combination with motion or daylight sensors, you save extra energy without compromising on safety or visibility. Please note: not every high bay is dimmable by default, so always check the specifications.
Resistant to dust, moisture, and intensive use
In industrial and logistical environments, not only the light output is important, but also the protection of the fixture. That is why many high bays have an IP65 rating. This means they are well protected against dust and water jets, which is important in warehouses, sheds, garages, and semi-open halls.In heavier environments, a good IK rating is also relevant, as it indicates how well the fixture withstands impacts.
If you choose a reliable LED high bay with a robust housing and good heat dissipation, you will also benefit from a long lifespan and fewer maintenance intervals at height.
Replacing old 250W or 400W high bay lighting
Many businesses are switching from conventional HPI, HQL, or other old high bay lighting to LED high bay fixtures. When doing so, you should look not only at the old wattage, but primarily at the actual light output, ceiling height, and light distribution. Therefore, an old 250W or 400W lamp is not automatically replaced on a one-to-one basis based on power alone.
In many situations, a modern high bay LED delivers much more efficient light, allowing you to achieve a better result with lower energy consumption.You will also benefit from instant full light, fewer replacements, and lower maintenance costs. Always have installation or conversion carried out by a qualified installer, especially if existing connections or controls need to be modified.
Why buy high bays at LedLoket
At LedLoket you combine a wide range with practical advice. You can choose from various wattages, light colors, and models for warehouses, workshops, and industrial applications, supported by specialists who work with commercial lighting every day.
- Wide range of high bay LED fixtures, including dimmable models
- Personal technical advice on selection, quantities, and application
- Free commercial lighting calculation for halls and projects
- Fast delivery from our own stock and showroom in Denekamp, Overijssel
Frequently asked questions about high bay lighting
Which high bay is suitable for a height of 6 meters?
With a ceiling height of 6 meters, you will often need 100W or 150W, depending on the desired lux level, beam angle, and type of space.
How many m2 does a single high bay illuminate?
This varies depending on the lumen output, height, and beam angle. A powerful high bay can illuminate a large surface area, but a lighting plan remains the best choice for a uniform light distribution.
What is better: 3000K or 4000K?
For functional task lighting, 4000K is usually the safest choice. 3000K is warmer and more suitable when ambiance and comfort are more important than a cool, professional appearance.
Are all high bays dimmable?
No, not every high bay is dimmable by default. Always check whether the fixture supports features such as 1-10V or DALI if you want to dim or work with sensors.
Do I need IP65 in a warehouse?
In many warehouses and industrial facilities, IP65 is a wise choice because dust and moisture often play a role there. For cleaner indoor spaces, a lower protection rating may sometimes suffice.
Am I looking for a Philips high bay or a model with a Philips driver?
Our assortment also includes high bays with professional components, including versions featuring Philips parts.Check the product for the driver, LED chip, dimming options, and light output.
Still can't figure it out? Contact us for personalized advice or request a free lighting calculation for your warehouse, hall, or workshop.
