Bundle | 2X AC Triac RF Wireless Dimmer | 100-240V | Incl. 1X Remote Control
-
Reviews
...
-
Free shipping from 75,-
-
Ordered before 16:00 = delivered tomorrow
-
Easy returns within 30 days of purchase
Bundle | 2X AC Triac RF Wireless Dimmer | 100-240V | Incl. 1X Remot...
- Direct to:
- Description
- Specifications
- Reviews
- Related products
Specifications
-
Product category
-
Voltage
-
IP ratingIP20 - Geen bescherming
-
ControlAfstandsbediening
-
Dimming technologyFase afsnijding
-
Housing colorAntraciet
-
Housing materialPlastic
-
Number of cores
-
Warranty
-
CertificationsCE, RoHs
-
ConnectionNetstroom
-
InstallationInbouw
-
Maximum wattage
Bundle pack | 2 x AC Triac RF built-in wireless dimmer | 100-240V | Push to dim | Incl. 1x Remote control
These TWObuilt-in TRIAC wireless dimmers are supplied together with one wireless remote control. This allows you to control 2 different channels (e.g. rooms) with one remote control. Wireless dimming and switching your LED lighting on and off has never been easier. This new way of dimming ensures that you can operate your LED lighting from the comfort of your armchair! You can connect the wireless LED dimmer directly to 100 - 240V, so you do not need an extra transformer.
The maximum power that you can connect per LED dimmer is 244 Watts.
The size of the wireless dimmer is very small, making it easy to place inside the mounting plate of a pendant light, for example, or between the power supply and your garden lighting, allowing you to even dim your garden lighting wirelessly. The dimmer must be installed in a moisture-free location, as it is not waterproof.
Dimensions:
- Dimmer length: 52 mm
- Dimmer width: 52 mm
- Dimmer thickness: 26 mm
How do you connect a wireless dimmer with a remote control?
You can connect the dimmer directly to the mains power (220 Volt). Connect the power wires to the input of the dimmer. On the output, connect the power wires leading to your lighting.
You only need A2 and A1 when using a push dimmer.You then connect this to the A1, you do not need the A2 for this. The neutral wire is already connected at the input in this setup.
How do you pair the remote control to the dimmer?
Step 1. On the back of the dimmer you will see a black button. To pair the remote control with the dimmer, you must press this button.
Step 2. Choose a zone on your RF Wireless remote control to which you want to pair the dimmer.
Step 3. Once you have chosen a zone, briefly press the 'ON' button and then briefly press the 'OFF' button.
The dimmer is then paired with your remote control and is ready for use.
Now, if you briefly press the "OFF" button, the lights will turn off. If you briefly press the "ON" button, the lights will turn on.
If you press and hold the "ON" button longer, the lights will brighten.By holding down the "OFF" button longer, the lights will dim.
