LED Batten 120cm (Single) | Incl. 18W LED Tube

LED Tube Fixture 120cm (single) including LED Tube 18W

This bundle consists of:

1x fixture

1x LED tube

TL Fixture Information:

• IP 22 (Drip-proof)
• Suitable for indoor use
• Metal housing
• Dimensions in cm: 124 x 17.5 x 25 (LxWxH)
• Suitable for 1 LED tube of 120cm
• Includes all mounting materials
• 5 year warranty

TL Tube Information:

• 18 Watt, replaces 36 Watt
• Length: 120cm
• Design: Thermoplastic (hard plastic)
• Operating hours: 35.000 hours
• Lumens: 2160lm (light output)
• Light color: 2800K, Warm white
• 5-year warranty

LED fluorescent batten information:

This single LED fluorescent batten has a length of 120cm with a consumption of only 18 watts. This fluorescent batten comes standard with the corresponding 120cm LED fluorescent tube included. This replaces all "old" 36-watt fluorescent tubes. You therefore no longer need to buy a separate LED tube. This single 120cm fluorescent batten has an IP rating of IP22 (drip-proof) and is therefore only suitable for moisture-free spaces. This fluorescent batten can be linked to multiple fluorescent batten fixtures; you can route the cable through the fixture to the next one. You can place all 120cm LED fluorescent tubes in this fluorescent batten. This fluorescent fixture is made of lightweight and sturdy aluminum, and the housing is finished in a matte white color. Due to its high quality, you have a 5-YEAR warranty period!!

Installation is very easy. You can mount the fluorescent fixture directly to the ceiling or wall with screws; the screw holes are already pre-drilled. This LED fluorescent fixture is powered directly on one side with mains voltage (220-240V); there is no longer a starter or ballast (VSA) in this fixture. The LED fluorescent tubes are also powered directly on one side with 220-240V. This is much more energy-efficient because a ballast also continuously consumes power and can break down.

LED fluorescent fixture connection:

1. Ensure that 220-240V power cables are present at the location where you want to install the LED fixture.
2. Screw the fluorescent fixture to the ceiling, wall, or another surface.
3. Connect the power cable to one end cap of the fixture (Therefore, no cable needs to be installed on the other end cap. This end cap/socket serves as a "dummy" to hold the LED tube in place.)
4. Slide the sockets/end caps into the designated holes/cutouts.
5. Place the cover over the end caps and around the fixture, and press it securely into place. Then, turn the plastic clips into the holes that are still visible on the bottom.
6. Insert the LED fluorescent tubes into the fixture, placing the end with the specification sticker of the LED tube into the socket/end cap of the fluorescent fixture where you connected the 220-240V.
7. Switch the power back on and enjoy the light output of LED lighting.