LED Batten 150cm (Single) IP22 | Incl. LED Tube 22W

LED Tube Fixture 150cm (single) including LED Tube 22W

This bundle consists of:

1x fixture

1x LED tube

TL Fixture Information:

• IP22 (Drip-proof)
• Suitable for indoor use
• Metal housing
• Dimensions in mm: 1538 x 50 x 40 (LxWxH)
• Suitable for 1 LED tube of 150cm
• Includes all mounting materials
• 5-year warranty

TL Tube Information:

• 22 Watt, replaces 58 Watt
• Length: 150cm
• Version: Thermoplastic (hard plastic)
• Operating hours: 35.000 hours
• Lumens: 2640lm
• Available in Light Colors: 2800K - 4000K - 6000K
• 5 years warranty

LED waterproof batten fixture information:

This single LED batten fixture has a length of 150cm with a consumption of only 22 watts. This batten fixture comes standard with the corresponding 150cm LED tube included. This replaces all "old" 58-watt fluorescent tubes. So you no longer need to buy a separate LED tube. This single 150cm batten fixture has an IP rating of IP22 (drip-proof) and is therefore only suitable for dry areas. This fluorescent fixture can be linked with multiple fixtures; you can feed the cable through the fixture to the next one. You can place all 150cm LED tubesin this batten fixture. This LED batten is made of lightweight and sturdy aluminum, and the housing is finished in a matte white color. Thanks to its high quality, you benefit from a 5-YEAR warranty!!

Installation is very easy. You can mount the LED batten directly to the ceiling or wall using screws; the screw holes are already pre-drilled. This LED batten is powered directly on one side with mains power (220-240V). This batten no longer contains a starter or ballast (VSA). The LED tubes are also powered directly on one side with 220-240V. This is much more energy-efficient, as a ballast also continuously consumes power and can break down.

LED batten connection:

1. Ensure that 220-240V power cables are available at the location where you want to install the LED fixture.
2. Screw the LED batten to the ceiling, wall, or another surface.
3. Connect the power cable to one end of the fixture (Therefore, no cable needs to be installed on the other end. This end/socket serves as a "dummy" to keep the LED tube in place.)
4. Slide the sockets/end caps into the designated holes/cutouts.
5. Place the cover over the end caps and around the fixture, and press it securely into place. Then, turn the plastic clips into the holes that are still visible on the underside.
6. Insert the LED fluorescent tubes into the fixture, with the end cap containing the specification sticker of the LED tube placed in the socket of the fixture where you have connected 220-240V.
7. Turn the power back on and enjoy the light output of LED lighting.