LED Batten 120cm (Twin) with Reflector | Incl. 2x LED Tube 18W

LED Batten 120cm (Double) with Reflector | Incl. 2x LED Tube 18W

This bundle consists of:

1x fixture

2x LED tube

• IP 22 (Drip-proof)
• Suitable for indoor use
• Metal housing
• Dimensions in mm: 1232 x 150 x 73 (LxWxH)
• Suitable for 2 LED tubes of 120cm
• Includes all mounting materials
• 5-year warranty

Tube Information:

• 18 Watt, replaces 36 Watt
• Length: 120cm
• Type: Thermoplastic (hard plastic)
• Operating hours: 35.000u
• Lumens: 2160lm (luminous flux)
• Choice of Light Colors: 2800K - 4000K or 6000K
• 5-year warranty

LED Vapor Proof Fixture Information:

This double LED batten fixture with reflector has a length of 120cm with a power consumption of 2x 18 watts. This double 120cm batten fixture with reflector comes standard with 2x LED tubes with a choice of the following light colors 2800K - 4000K or 6000K included. The included LED tubes replace all "old" 2x 36 watt fluorescent tubes. Therefore, you no longer need to buy a separate LED tube.

This fluorescent fixture has an IP rating of IP22 (drip-proof) and is therefore only suitable for dry areas.This fluorescent fixture with reflector, also known as a trough fluorescent fixture, is frequently used in warehouses, workshops, or other industrial spaces. The reflector hood ensures that the light is directed downwards and not to the sides. This fluorescent fixture can be linked with multiple fluorescent fixtures; you can route the cable through the fixture to the next one. You can install all 120cm LED fluorescent tubes. in this fluorescent fixture with reflector. This fluorescent fixture with reflector is made of lightweight and sturdy aluminum, and the housing has a matte white finish. Thanks to its high quality, you benefit from a 5-YEAR warranty period!!

Installation is very simple.. You can mount the fluorescent fixture directly to the ceiling or wall using screws; the screw holes are already pre-drilled.this LED batten with reflector is powered directly on one side with mains electricity (220-240V); this fluorescent fixture no longer contains a starter or ballast (electromagnetic ballast). The LED fluorescent tubes are also powered directly on one side with 220-240V. This is much more energy-efficient because a ballast also continuously consumes power and can break down.

LED batten connection:

1. Ensure that 220-240V power cables are present at the location where you want to mount the LED fixture.
2. Screw the fluorescent fixture to the ceiling/wall or another surface.
3. Connect the power cable to the fixture (it is powered on one side, so no cables run to the other two sockets. These sockets/fittings serve purely as a "dummy" to hold the fluorescent tube in place.)
4. Click the fittings/sockets into the designated holes.
5. Place the reflector cover over the fixture and secure it using the supplied plastic clips.
6. Place the LED tube lights in the fixture, with the end cap featuring the specification sticker of the LED tube inserted into the holder/socket of the fluorescent fixture where you connected the 220-240V.
7. Turn the power back on and enjoy the light output of LED lighting.