PHILIPS LED Batten 120cm (Double) | Incl. 2x LED Tube 15.5W

PHILIPS LED Tube Fixture 120cm (double) including 2x LED Tube 15.5 Watt

Fixture Information:

• IP 22 (Drip-proof)
• Suitable for indoor use
• Metal housing
• Dimensions in mm: 1232 x 50 x 40 (LxWxH)
• Suitable for 2 LED tubes of 120cm
• Includes all mounting materials
• 5-year warranty

Philips Tube Information:

• 15.5 Watt, replaces 36 Watt
• Length: 120cm
• Design: Thermoplastic (hard plastic)
• Operating hours: 30.000 hours
• Lumens: 1800lm
• Available in Light Colors: 3000K - 4000K - 6000K
• 3 years warranty

Philips LED waterproof fixture information:

This double Philips LED waterproof fixture has a length of 120cm with a consumption of only 2x 15.5 watts. This LED batten comes standard with two matching 120cm LED fluorescent tubes included. This replaces all "old" Philips 2x 36 watt fluorescent tubes. Therefore, you no longer need to buy separate LED tubes. This double 120cm LED fixture has an IP rating of IP22 (drip-proof) and is therefore only suitable for dry areas. This LED fixture can be linked to multiple fixtures; you can feed the cable through the fixture to the next one. You can place all 120cm LED tubesin this LED fixture. This LED batten is made of lightweight and sturdy aluminum and the housing is finished in a matte white color. Due to its high quality, you enjoy a warranty period of 3 YEARS!!

Installation is very simple. You can mount the LED batten directly to the ceiling or wall with screws; the screw holes are already pre-drilled. This LED batten is powered directly on one side with mains power (220-240V). This LED batten no longer contains a starter or ballast (electromagnetic ballast). The LED tubes are also powered directly on one side with 220-240V. This is much more energy-efficient because a traditional ballast also consumes continuous power and can fail.

LED batten connection:

1. Ensure that 220-240V power cables are present at the location where you want to install the LED batten.
2. Screw the LED batten to the ceiling, wall, or another surface.
3. Connect the power cable to one end of the fixture (Therefore, no cable needs to be installed on the other end. This socket/fitting serves as a "dummy" to keep the LED tube in place.)
4. Slide the fittings/sockets into the designated holes/cutouts.
5. Place the cover over the sockets and around the fixture, and press it securely into place. Then, twist the plastic clips into the holes that are still visible on the bottom.
6. Insert the LED fluorescent tubes into the fixture, placing the end with the sticker containing the LED tube specifications into the socket/fitting of the LED fixture where you connected the 220-240V power supply.
7. Turn the power back on and enjoy the light output of LED lighting.

For more information regarding the installation and operation of LED fluorescent fixtures and LED fluorescent tubes , please refer to our article. “How do I connect LED tube lighting?”