PHILIPS LED Batten 120cm (Double) with Reflector | Incl. 2x LED Tube 15.5W

PHILIPS LED Tube Fixture 120cm (double) with reflector | Incl. 2x LED Tube 15.5W

• IP22 (Drip-proof)
• Suitable for indoor use
• Metal housing
• Dimensions in mm: 1232 x 150 x 73 (LxWxH)
• Suitable for 2 LED tubes of 120cm
• Includes all mounting materials
• 3-year warranty

Philips LED Tube Information:

• 15.5 Watt, replaces 36 Watt
• Length: 120cm
• Design: Thermoplastic (hard plastic)
• Operating hours: 35.000u
• Lumens: 2160lm (light output)
• Choice of Light Colors: 2800K - 4000K or 6000K
• 5 years warranty

Philips LED batten fixture information:

This double Philips LED batten fixture with reflector has a length of 120cm with a consumption of 2x 15.5 watts. This double 120cm batten fixture with reflector comes standard with 2x LED tubes with a choice of the following light colors 3000K - 4000K or 6000K included. The included LED tubes replace all "old" 2x 36 watt fluorescent tubes. So you no longer need to buy a separate LED tube.

This fluorescent fixture has an IP rating of IP22 (drip-proof) and is therefore only suitable for moisture-free rooms.This fluorescent fixture with reflector, also known as a trough fluorescent fixture, is often used in warehouses, workshops, or other industrial halls. The reflector hood ensures that the light is beamed downwards and not to the sides. This fluorescent fixture can be linked with multiple fluorescent fixtures; you can route the cable through the fixture to the next fixture. You can place all 120cm LED tube lights. in this fluorescent fixture with reflector. This fluorescent fixture with reflector is made of lightweight and sturdy aluminum, and the housing is finished in a matte white color. Due to its high quality, you have a 3-YEAR warranty period!!

Installation is very easy. You can mount the fluorescent fixture directly to the ceiling or wall with screws; the screw holes are already pre-drilled.This LED fluorescent fixture with reflector is powered directly on one side with mains power (220-240V). This fluorescent fixture no longer contains a starter or ballast (VSA). The LED fluorescent tubes are also powered directly on one side with 220-240V. This is much more energy-efficient because a ballast also consumes continuous power and can fail.

Installation of Philips LED fluorescent fixture:

1. Ensure that 220-240V power cables are available at the location where you want to mount the LED fixture.
2. Screw the fluorescent fixture to the ceiling/wall or another surface.
3. Connect the power cable to the fixture (powered on one side, so no cables run to the other two end caps. These end caps/sockets serve purely as "dummies" to hold the fluorescent tube in place.)
4. Click the sockets/end caps into the designated holes.
5. Place the reflector hood over the fixture and secure it with the supplied plastic clips.
6. Insert the LED fluorescent tubes into the fixture, placing the end with the specification sticker of the LED tube into the socket/fitting of the fluorescent fixture where you connected the 220-240V.
7. Turn the power back on and enjoy the light output of LED lighting.

For more information about connecting and operating LED fluorescent fixtures and LED fluorescent tubes, please refer to our article. "How do I connect LED fluorescent lighting?"

Looking for multiple types/lengths of fluorescent fixtures? Under our category 'LED fluorescent tube' you will find all our fluorescent fixtures.